搜索
imgboxbg
All categories

内页联系方式

Time of issue:2020-06-28 00:00:00

1

Coil: (021) 56678632
Asphalt tile:(021) 56453061
The Ministry felt: (021) 64380226
Provincial Department: (021) 56453393
Service hotline:(021) 64387777

Detail

name:Color scale fiberglass tire asphalt shingles

Retail price
0.0
Market price
0.0
Number of views:
1000
no:
1-005
Quantity
-
+
Stock:
0
1
Detail
Parameters

1. Product Name: YXJ-121 color fiberglass tire asphalt shingles

2. Product Features: color fiberglass tire asphalt shingles are fiberglass base for the child, after dipping high-quality asphalt, one side coated color cover mineral aggregates, sprinkle the other side with new tile-shaped roofing material made of isolation sheet. It not only has rich colors, forms, light and durable, simple construction and other characteristics, and both waterproof, decorative features, is widely used at home and abroad sloping roof of the new waterproof materials, especially for roof drainage slope of not less than 20% slope roofing.

3. Product specifications and performance:

3.1、Product Specifications:

Asphalt shingles category

Length X Width(mm)

Thickness(mm)

piece/ Pack

Construction Area㎡

Three tabs type

1000X333

≥2.6

21

3

Hexagonal

1000X317.5

22

3

Stacked

1000X340

14

2

3.2、Product Outline

 1

3.3 The main physical properties of the product:


No.

Project

Flat tiles

Shingling

1

Soluble content/(g/㎡)

1000

1800

2

Pull(N/50mm)

Portrait

500

Transverse

400

3

Heat resistance(90℃)

No flowing, sliding, dropping bubble

4

Flexibility(10℃)

No cracks

5

Nail pull resistance performance/N   ≥

75

 

3.4 Storage and transportation

Storage and transportation should be flat to prevent tilting or lateral pressure, height of no more than 15 bags, to avoid the rain, sun, attention to ventilation. Storage temperature not higher than 45 ℃, storage period of one year from the date of production.

4.Construction Points

4.1 General Provisions
4.1.1, except three vertical tile, the hexagonal tiles, imbricated in the construction should be preceded by the removal of the product comes insulating film;
4.1.2, construction workers construction should wear rubber-soled shoes, soft, avoid the stampede has paved asphalt shingles;
4.1.3 through the roofing layer piping, equipment or embedded parts, etc. must be installed prior to laying asphalt shingles;
4.1.4, asphalt shingles auxiliary facility workers should be above 5 ℃ is appropriate, when four or more wind and rain, snow, not construction.
4.2 construction equipment and supporting materials
4.2.1 Construction of asphalt shingles has a common claw hammer hand, hook draw knife, ruler, pencil, fountain, putty knife;
4.2.2 asphalt shingles commonly used in roofing nail supporting materials (concrete nails and wood nails), asphalt glue.
4.3 laying asphalt shingles
4.3.1 grassroots requirements: the laying of asphalt shingles grassroots must be smooth, dry, solid, clean.
4.3.2 primer or cushion: cold cement grassroots base oil should be primed twice; wood grass to lay linoleum floor mat.
4.3.3 elastic line: In order to ensure the laying of neat, to meet the requirements, before laying should be laid on the grass playing lines. Perpendicular to the vertical center line of the roof, and the roof is in the center, the distance between each line is 167mm; a straight line parallel to the horizontal direction of the roof, the spacing between each line of 143mm (hexagonal asphalt shingles to 136mm).
4.4 Main Roof laying:

① first to lay the initial layer, the initial layer laid directly at its base along the roof, with a self-adhesive outwardly and close to the cornice. Apply glue on the back of Lek table, and roofing nails on the roof. To extend the initial layer cornices 10mm.
② Each roof tiles initial layer should overlap, but pointing downward and cornice tile slots, two adjacent layers of asphalt shingles trough should be evenly staggered.
③ Each layer of asphalt shingles with roofing nails required on the roof, under normal circumstances, three tabs, hexagonal asphalt shingles with four nails, laminate tile with five nails. For enhanced wind resistance or roof slope is large, it may be appropriate to increase the number of nails.
④ construction in the cold season, when strong winds or region, should be in the back of the tile glue smear a small amount of asphalt used to enhance the adhesion of asphalt shingles should avoid being squeezed out tiles outside.
⑤ long roofing nails not less than 25mm, in more detail Tile and laminate tile laying at waterproof, long nails also need to be appropriately increased to ensure that the driving depth Base.
⑥ nail shop to be vertical when driving nails, roofing nails must be covered upper tiles, roofing nails from the tile edge 20-25mm appropriate.
Note: the laying of asphalt shingles and other construction details see "colored asphalt tile roof construction Technical Specification" according to the prepared by the Company.

We could not find any corresponding parameters, please add them to the properties table

相关案例

There is currently no content to display
Please add data record on website background.

Shanghai Building Materials Group Waterproof Materials Co., Ltd.    沪ICP备05017346号     Powered by www.300.cn